Shutter name (e.g. kitchen shutter #1):
.
Special Notes (optional):
|
| Quantity: |
My window has unobstructed depth of
|
I want my shutter to be installed with:
Inside 1 1/2" Bullnose Z-Frame
Requires 1 1/2" of depth
(For this choice, enter your window opening size)
Inside 2" Bel Air Z-Frame
Requires 1 1/2" of depth and adds 10% to price
(For this choice, enter your window opening size)
Inside Fully-Recessed Beaded L-Frame
Requires 2" of depth
(For this choice, enter your window opening size)
Direct_Mount (No Frame - Inside Mount Only)
(For this choice, enter your window opening size)
(Out of square windows will have light gaps.)
Outside Bullnose L-Frame
(For this choice, specify the desired shutter size, not your window size. We recommend 3" wider than window)
Outside 2" Camber Deco Frame adds 10%
(For this choice, specify the desired shutter size, not your window size. We recommend 6" wider than window)
|
Width:
Height:
|
I want my tilt rod positioned:
Standard Front Tilt
Invisible Tilt (adds 10%)
|
My window has a sill that:
Protrudes
Does not Protrude
|
I want my louver size to be:
2 1/2" standard
3 1/2" large
1 7/8" old-world (adds 20%) |
Please choose a color.
 |
I want my hinge color to be:
Silk White Pearl Bisque Antique Brass Stainless Steel (adds 5%) |
I want my shutter to be built as a:
Full Height Shutter
Cafe Shutter (partial height)
|
Please choose your configuration.
Click here to view all Shutter Configurations. |
Divider Rail
inches from the bottom.
Required on shutters over 72" high. |
My window tilts inward for cleaning:
Yes
No
Does the window opening have molding around it?
Yes
No
This shutter will be installed next to another shutter.
(this is important for rooms with more than 1 shutter side by side.)
No
Yes | | If yes, please list all shutters below that this shutter will hang next to
(This will allow us to match the # of louvers per panel and height of any divider rails):
Please specify if you want the top or bottom portion to align with the other shutters.
|
|
I want my installation holes predrilled. (Available for Inside Mount only)
Yes (adds 5%)
No
|
|
Product Constraints:
- A Divider Rail is not available for shutters with a height of less than 40".
- Divider Rails are mandatory for shutters 72" and higher.
- Standard Tilt: Shutters with 2 1/2" louvers, Inside mount Z-Frame have a minimum window depth of 1.5".
OR
Invisitilt: Shutters with 2 1/2" louvers, Inside mount Z-Frame have a minimum window depth of 2".
- Standard Tilt: Shutters with 3 1/2" louvers, Inside mount Z-Frame have a min window depth of 2".
OR
Invisitilt: Shutters with 3 1/2" louvers, Inside mount Z-Frame have a min window depth of 2.5". - Standard Tilt: Shutters With 2.5" Louvers, Inside Mount L Frame or Direct Mount Have A Min Window Depth of 2".
OR
Invisitilt: Shutters With 2.5" Louvers, Inside Mount L Frame or Direct Mount Have A Min Window Depth of 2.5". - Standard Tilt: Shutters With 3.5" Louvers, Inside Mount L Frame or Direct Mount Have A Min Window Depth of 2.5".
OR
Invisitilt: Shutters With 3.5" Louvers, Inside Mount L Frame or Direct Mount Have A Min Window Depth of 3". - Outside Mount Shutter Without window sill - Add 3" to the width of the window and 3" to the height.
Or With a Window Sill Add 3" to the Width and 1.5" to The Height. - Divider rails may vary from the requested position up or down by a maximum of 1" for 2 1/2" louvers and a maximum of 1 1/2" for 3 1/2" louvers and a maximum of 3/4" for 1 7/8" louvers. This variance accommodates even louver placement.
|
|
|
