Want Help? Call: 800.505.1905
Norman: Fauxwood Shutters: Norman Woodlore Plantation Shutter
Shutter name (e.g. kitchen shutter #1):
.
Quantity:
My window has unobstructed depth of
I want my shutter to be installed with:
Inside 1 1/2" Bullnose Z-Frame
Requires 1 1/2" of depth and adds 15% to price
(For this choice, enter your window opening size)

Inside 2" Bel Air Z-Frame
Requires 1 1/2" of depth and adds 35% to price
(For this choice, enter your window opening size)

Inside Fully-Recessed Beaded L-Frame
Requires 2" of depth
(For this choice, enter your window opening size)

Inside Direct Mount (No Frame, hinge direct to the window)
(For this choice, enter your window opening size)
(Will have light gaps, Not for out of square windows)

Outside Bullnose L-Frame
(For this choice, specify the desired shutter size, not your window size. We recommend 3" wider than window)

Outside 2" Camber Deco Frame adds 10%
(For this choice, specify the desired shutter size, not your window size. We recommend 6" wider than window)


Width:       
Height:   

I want my tilt rod positioned:
Standard Front Tilt
Invisible Tilt (adds 10%)
My window has a sill that:
Protrudes
Does not Protrude
I want my louver size to be:
2 1/2" standard
3 1/2" medium
4 1/2" large
1 7/8" old-world (adds 20%)
Please choose a color.
I want my hinge color to be:
Silk White Pearl Bisque Antique Brass Stainless Steel (adds 5%)
I want my shutter to be built as a:
Full Height Shutter
Cafe Shutter (partial height)
Please choose your configuration.


Click here to view all Shutter Configurations.
Divider Rail

inches from the bottom.
Required on shutters over 72" high.

My window tilts inward for cleaning:
Yes
No
Does the window opening have molding around it?
Yes
No

This shutter will be installed next to another shutter.
(this is important for rooms with more than 1 shutter side by side.)
No
Yes, I want my top rail position to match.
If I have a divider rail , My bottomrail and divider rail position will be matched.
I want my installation holes predrilled and installation screws sent. (Available for Inside Mount only)
Yes (adds 5%)
No

Product Constraints:

  • A Divider Rail is not available for shutters with a height of less than 40".
  • Divider Rails are mandatory for shutters 72" and higher.
  • Standard Tilt: Shutters with 2 1/2" louvers, Inside mount Z-Frame have a minimum window depth of 1.5". OR Invisitilt: Shutters with 2 1/2" louvers, Inside mount Z-Frame have a minimum window depth of 2".
  • Standard Tilt: Shutters with 3 1/2" louvers, Inside mount Z-Frame have a min window depth of 2".
    OR
    Invisitilt: Shutters with 3 1/2" louvers, Inside mount Z-Frame have a min window depth of 2.5".
  • Standard Tilt: Shutters With 2.5" Louvers, Inside Mount L Frame or Direct Mount Have A Min Window Depth of 2".
    OR
    Invisitilt: Shutters With 2.5" Louvers, Inside Mount L Frame or Direct Mount Have A Min Window Depth of 2.5".
  • Standard Tilt: Shutters With 3.5" or 4 1/2" Louvers, Inside Mount L Frame or Direct Mount Have A Min Window Depth of 2.5".
    OR
    Invisitilt: Shutters With 3.5" Louvers, Inside Mount L Frame or Direct Mount Have A Min Window Depth of 3".
  • Outside Mount Shutter Without window sill - Add 3" to the width of the window and 3" to the height.
    Or With a Window Sill Add 3" to the Width and 1.5" to The Height.
  • Divider rails may vary from the requested position up or down by a maximum of 1" for 2 1/2" louvers and a maximum of 1 1/2" for 3 1/2" louvers and a maximum of 3/4" for 1 7/8" louvers. This variance accommodates even louver placement.


Proceed to Checkout
Window Shopper App
Check out our new Window Shopper App Available on the iPhone & Google Play App Store