|Measuring - Outside Mount|
Before taking any measurements, step back from your window and decide if you want to mount the window treatment inside the window recess, or outside on the wall or molding. We usually recommend an inside mount when possible because it provides a cleaner look. However, an outside mount can make a window appear larger or hide an unattractive window. For an inside mount, the window opening must have enough unobstructed depth to allow mounting. When measuring for an outside mount, be sure to allow for the height of the product's headrail in your measurements. We will custom make your blinds to the sizes you write on the order. If these sizes are incorrect it is impossible to change the blind, so take your time and double check your measurements.
For an outside mount:
Measure the opening width. If there is room, add at least 3" to each side of the window opening for minimum light gap coverage and maximum privacy.
Measure the opening height. Add a minimum of 2 1/2" in height (3" for 2" horizontal blinds) to allow space for mounting brackets above the opening plus enough overlap for the bottom. For an outside mount we will not take any deductions off the tip to tip width, but one inch will be deducted off the fabric. After determining the measurements that you want the blind to be, hold the tape measure up to your window and visualize what the overall size will look like on that window before proceeding.
Tip: When measuring, don't be surprised if your windows aren't square - many aren't. If they're a little out of square, it probably won't be noticeable. If your window is significantly of square, you might want to consider an Outside Mount to hide the window.