Helpful Notes:

• Shades that are greater than 73" wide and 53" high will have a seam, due to the maximum fabric width of 73" wide.
• Shades greater than 73" wide, but are still under 61" high will have the fabric railroaded to avoid having a seam.
• Long Extension Brackets are only available with outside mount .
• The maximum width for a shade with a cassette valance is 84".
• This product cannot be made as a reverse roll with a cassette system.
• Inside mounted roller shades will have an approximate 1" vertical "light gap" between the edge of the fabric and the window casing on side with the cord loop, and a ½" light gap on the other side. This is because the fabric must be cut narrower than the operating mechanisms at the top. If this is not acceptable, consider: --adding drapery panels to cover the light gaps --choosing an outside mounted roller shade with at least 2 ½" of overlap on each side --selecting a different product, such as a Honeycomb Shade which will have smaller light gaps of up to 1/4" on each side.